1

00:00:00,680  -->  00:00:04,480
In this video, we are going to test our application.

2

00:00:04,960  -->  00:00:12,040
I already create a topology in gns3 with 3 mikrotik routers and 3 cisco routers.

3

00:00:12,840  -->  00:00:17,000
I already configure The IP Address in all of routers.

4

00:00:17,840  -->  00:00:23,560
I also already add all of devices in gns3
to django admin.

5

00:00:24,740  -->  00:00:33,740
Now let’s try to test our application. Let’s do a configure first. Let’s check all devices,

6

00:00:38,220  -->  00:00:40,980
and then put the mikrotik command here.

7

00:00:41,160  -->  00:00:47,480
In this case, we will create a new bridge
interface and configure the ip address to that bridge.

8

00:01:05,440  -->  00:01:13,520
Next. let’s put the cisco command here.
We will create loopback0 and configure an IP Address to that loopback.

9

00:01:18,380  -->  00:01:20,860
Okay let’s submit.

10

00:01:26,580  -->  00:01:33,320
Okay we have done. But if we see here, we
already success in mikrotik device,

11

00:01:34,160  -->  00:01:41,840
but we got an error in cisco devices. For the detail
information, we can see in the log menu.

12

00:01:44,120  -->  00:01:48,200
Here we can se the message is “time is not defined”.

13

00:01:48,200  -->  00:01:55,160
Let’s go to visual studio code and see whats wrong. Let’s go to configure function.

14

00:01:55,180  -->  00:02:04,100
We can see here that if the device is cisco, we use time function. But we forget to import it.

15

00:02:04,100  -->  00:02:10,620
That’s why we got an error “time is
not defined”. Let’s import it

16

00:02:12,540  -->  00:02:16,400
Now let’s try to configure the cisco device
again.

17

00:02:24,800  -->  00:02:26,920
The command is still same,

18

00:02:44,620  -->  00:02:51,840
Okay now we have successfully configure the
cisco device. Let’s do a verify config.

19

00:02:54,580  -->  00:02:56,520
Check all devices,

20

00:03:01,640  -->  00:03:06,800
and in the mikrotik, let’s
put a command “ip address print”,

21

00:03:08,780  -->  00:03:14,420
and in the cisco let’s put command “show ip
interface brief”

22

00:03:23,000  -->  00:03:30,280
Okay, this is the result. We can see that
now we have loopback interface in all of routers.

23

00:03:30,740  -->  00:03:33,380
Let’s take a look in the log menu.

24

00:03:35,500  -->  00:03:40,760
Here we can see that we have a verify_config with success status.

25

00:03:43,640  -->  00:03:46,380
Let’s also take a look in the home.

26

00:03:48,680  -->  00:03:52,280
Here we can see the last 10 event.

27

00:03:52,600  -->  00:03:57,260
Okay.  Now Our project is done, and running
well!